JDMODEL JDM-65 1/14 8×8 Electric RC Truck Heavy Hydraulic Dump Truck

JDMODEL JDM-65 1/14 8×8 Electric RC Truck Heavy Hydraulic Dump Truck

Features:

Hydraulic fluid: 32# or 46# hydraulic fluid

Gearbox: Planetary gearbox features a compact structure. Simulation ziplock type shift has the characteristics of large torque. You can change gear on the move.

Reduction ratio: First gear 1:64 / second gear 1:6

High magnetic torque brush 35T540 motor, carbon brush can be replaced.

320A 7.2-16.8V high voltage ESC.

The vehicle can go through a 45-degree steep slope with a load of 15 kg.

Front Suspension: Pull rod swing arm type balance suspension increases the swing amplitude of front axle, and improve the performance of truck passing

Rear Suspension: Lightweight parabolic steel plate with few pieces. Better load than large elasticity, so that each tire is evenly grounded

Drive axle: Zinc-alloy simulated single-stage deceleration axle shape design. Can control differential lock, to improve the tipper’s passability. The hexagon connector adopts a bushing structure for better installation precision.

Steering: Double connecting rod steering system. The steering gear is installed between the main beams. 17KG steering gear drive, large steering torque. Under the coordination of each connecting rod, different steering angles can be formed to reduce steering resistance

Wheel hub: 10 holes heat dissipating vacuum tire ring structure.

Tyre: 315/80/R22.5, 86.5mm in diameter, 22MM in width. There are deep groove patterns to improve grip

Transmission Shaft: Equipped with an initial V-shaped gradually open Angle transmission shaft. Spline structure & large torque

Oil Cylinder: 5-level multi-level oil cylinder is 37mm in diameter, 115mm in stroke, 5MP in pressure resistance. If connected with oil pump set, the theoretical thrust is 400KG

Oil Pump: 2814 brushless motor drive, rated pressure 3.5-5mpa, flow rate 0.42L/MIN. Small volume and high efficiency. Driven by 40A brushless electric adjustment

The Car Buckle: The button-down structure for replacing battery conveniently. When the lock is pulled, the car shell will spring up automatically.

Oil Tank: The exterior is anodized silver, and the interior is loaded with hydraulic oil, which can make the car more gorgeous

Taillight: The taillight with an explosion-proof net designed in the static model can be installed freely with 3-5mmLED lights

Carriage: It utilizes a simulation car bucket for faster unloading and reducing material adhesion.

Sound Group: 3 sound effects can be replaced

Light Group: Additional purchase is required

Note: Voltage of remote control is 9.6V, and the voltage of vehicle is 11.1v (3S lithium battery or 12v battery)

Operation Steps: Firstly turn on the remote control. Next, connect the power supply of the vehicle before the 4 signal sound to be confirmed (within 5s).

You can paint and customize it yourself

Suitable for high-end professional RC model enthusiasts or construction machinery model enthusiasts. Give you unprecedented experience to feel the power of the RC construction machinery model.

Pattern Suit: Suitable for people over 14 years old. Perfect gifts for DIY modified car, teaching, collection and more

Specifications:

Brand: JDMODEL
Material: Metal + Plastic
Length: 680mm
Width: 210mm
Height: 160mm
Weight: 10.3KG (Plug Remote Control 10.8KG)
Theoretical Load: 15KG
Total Deadweight: 24.5KG
Remote Control: FS-I6S (2.4G / 6CH)
Remote Control Battery: 9.6v (Not Included)
Vehicle Battery: 11.1V, 3S Lithium Batteries and Above (Not Included)
Motor: 35T 540 Brushed Motor
ESC: 320A 7.2-16.8V High Voltage ESC
Servo: 17KG Servo
Product Size: 68 x 21 x 16cm
Product Weight: 10300g

Package Content:

1 x Car
1 x Controller